Chapter 1Introduction
1.1Basic concepts and models of communication system
1.1.1Communication system model
1.1.2Analog communication model
1.1.3Digital communication model
1.2The classification of communication systems
1.2.1Modulation mode
1.2.2Division of frequency band
1.3Information and its measurement
1.4The main performance index of communication systems
Summary and discussion
Homework
Vocabulary
Chapter 2Random processes
2.1Basic concepts of random processes (definition of random processes)
2.1.1Definition
2.1.2Numerical characteristics of a random process
2.2Stationary random process
2.2.1Definition
2.2.2Ergodicity
2.2.3Autocorrelation function of stationary random processes
2.2.4Power spectral density
2.3Gaussian process
2.4Transmission of a random process through a linear timeinvariant (LTI) filter
2.5Narrowband random process
2.6Sine wave plus narrowband Gaussian noise
2.7Gaussian white noise and band pass white noise
Summary and discussion
Homework
Vocabulary
Chapter 3Channel
3.1The classification of channels
3.1.1Wireless channels
3.1.2Wire channel
3.2Channel models
3.2.1Modulation channel model (调制解调模型)
3.2.2Coding channel model (编码信道模型)
3.3Influence of the channel characteristics on transmission (for modulation model)
3.3.1Influence of constant parameter channel on signal transmission
3.3.2Influence of random parameter channel of signal transmission
3.4Channel capacity (continuous channel)
Summary and discussion
Homework
Vocabulary and terminologies
Chapter 4Continuouswave modulation (analog modulation system)
4.1Introduction
4.2Linear modulation
4.2.1AM
4.2.2Doublesideband modulation
4.2.3Singlesideband modulation
4.2.4Vestigial sideband modulation
4.3Antinoise performance of linear demodulation
4.3.1Noise in linear receiver using coherent detection
4.3.2Noise in AM receivers using envelope detection
Homework (part 1)
4.4Angle modulation (nonlinear modulation process)
4.4.1Basic definitions
4.4.2NBFM(窄带调频)
4.4.3Wideband frequency modulation (WBFM)
4.4.4Generating an FM signal
4.4.5Demodulation of FM signals
4.4.6Noise in FM receivers
4.5Frequencydivision multiplexing(频分复用)
Summary and discussion
Homework (part 2)
Terminologies
Chapter 5Pulse modulation
5.1Sampling process
5.2Analog pulse modulation (模拟脉冲调制)
5.3Quantization process (量化过程)of sampled signal
5.3.1Uniform quantization (均匀量化)
5.3.2Nonuniform quantization
5.4PCM(pulse code modulation，脉冲编码调制)
5.4.1The principle of PCM
5.4.2Noise in PCM system
5.4.3Delta modulation (增量调制)
5.4.4DPCM (differential pulse code modulation，差分脉冲调制)
5.5TDM(timedivision multiplexing，时分复用)
Summary and discussion
Homework
Terminologies
Chapter 6Baseband pulse transmission
6.1Waveform and frequency characteristics of baseband digital signal
6.1.1Waveform of baseband digital signal
6.1.2Symbol code types of baseband digital signals for transmission
6.1.3Frequency characteristic
6.2Matched filter
6.3Error rate due to noise
6.3.1Binary polar baseband system
6.3.2The unipolar baseband system
6.4Intersymbol Interference
6.4.1Nyquist’s criterion Ⅰ
6.4.2Nyquist’s criterion Ⅱ
6.5Eye pattern
Summary and discussion
Homework
Terminologies
Chapter 7Passband data transmission (digital passband transmission)
7.1The basic principle of three digital passband modulation
7.1.1ASK
7.1.2FSK
7.1.3PSK (absolute phase shift keying)
7.1.4DPSK (differential PSK)
7.2Antinoise performance of digital passband modulation system
7.2.1Bit error rate of ASK
7.2.2Bit error rate of 2FSK
7.2.3Bit error rate of PSK
7.2.4Performance comparison of digital keying transmission system
7.3Hybrid amplitude/phase modulation schemes
7.4OFDM system
Summary and discussion
Homework
Terminologies
Chapter 8Further reading： new technologies in communication systems
8.1Compressive sensing (CS)
8.1.1Introduction
8.1.2The mathematics theory
8.1.3Application
8.2Ultra wideband (UWB) system
8.2.1The definition of UWB
8.2.2Comparison with other wireless communications
8.2.3Feature of UWB
8.2.4Impulse modulation signal in UWB signal
8.2.5The application of UWB
8.3MIMO technology
8.3.1The model of MIMO
8.3.2Applications
附录AMATLAB仿真实验
Experiment 1Continuouswave modulation (corresponding to Chapter 4)
Experiment 2Pulse modulation (corresponding to Chapter 5)
Experiment 3Digital passband transmission(corresponding to Chapter 7)
附录B实验箱实验
实验一各种模拟信号源实验
实验二脉冲编码调制PCM
实验三AMI/HDB3编码和译码过程实验
实验四FSK调制解调实验
实验五通信系统综合实验
附录C误差函数表
参考文献
購物車/收銀台(
0
) | 在線留言板
| 付款方式
| 聯絡我們
| 運費計算
| 幫助中心 |
加入書簽
HOME
新書上架
